Here is the inline seating die, seating stem reamer for the die and the chamber reamer used to make the wild cat and loading tools. If not I will need to come up with a new bullet mold for the. I will test it this week in preparation for next months match. 323 diameter bullets I could obtain for the cadet bores but think this will help in the accuracy department. It was reasonably accurate with the standard. 314 sizer luber die so I could size down cadet bullets to fit the groove diameter of this barrel. I just recently made a carbide bit boring tool and bored out a. The hardest part was making the chamber reamer but it did a good job on all the three applications. I made the inline loading die and sizing die from the same reamer I cut the chamber with then lapped out the rifle chamber with a fire-formed case to make the chamber a bit larger for loading ease. 310 cadet barrel reamed out to the wildcat.
357 maximum was re-barreled and chambered to that cartridge, the Wildcat had the chamber of the original.
0 kommentar(er)
